Last data update: May 06, 2024. (Total: 46732 publications since 2009)
Records 1-3 (of 3 Records) |
Query Trace: Louk K[original query] |
---|
Benefits and limitations of field-based monitoring approaches for respirable dust and crystalline silica applied in a sandstone quarry
Cauda E , Dolan E , Cecala A , Louk K , Yekich M , Chubb L , Lingenfelter A . J Occup Environ Hyg 2022 19 (12) 1-18 With the advent of new sensing technologies and robust field-deployable analyzers, monitoring approaches can now generate valuable hazard information directly in the workplace. This is the case for monitoring respirable dust and respirable crystalline silica concentration levels. Estimating the quartz amount of a respirable dust sample by nondestructive analysis can be carried out using portable Fourier transform infrared spectroscopy (FTIR) units. Real-time respirable dust monitors, combined with small video cameras, allow advanced assessments using the Helmet-CAM methodology. These two field-based monitoring approaches, developed by the National Institute for Occupational Safety and Health (NIOSH), have been trialed in a sandstone quarry. Twenty-six Helmet-CAM sessions were conducted, and forty-one dust samples were collected around the quarry and analyzed on site during two events. The generated data generated were used to characterize concentration levels for the monitored areas and workers, to identify good practices, and to illustrate activities that could be improved with additional engineered control technologies. Laboratory analysis on the collected samples complemented the field finding and provided an assessment of the performance of the field-based techniques. Only a fraction of the real-time respirable dust monitoring sessions data could be corrected with laboratory analysis. The average correction factor ratio was 5.0. Nevertheless, Helmet-CAM results provided valuable information for each session. The field-based quartz monitoring approach overestimated the concentration by a factor of 1.8, but it successfully assessed the quartz concentration trends in the quarry. The data collected could be used for the determination of a quarry calibration factor for future events. The quartz content in the dust was found to vary from 14% to 100%, and this indicates the need for multiple techniques in the characterization of respirable dust and quartz concentration and exposure. Overall, this study reports the importance of the adoption of field-based monitoring techniques when combined with a proper understanding and knowledge of the capabilities and limitations of each technique. |
Forty years of NIOSH/USBM-developed control technology to reduce respirable dust exposure for miners in industrial minerals processing operations
Cecala AB , Patts JR , Louk AK , Haas EJ , Colinet JF . Min Eng 2020 72 (6) 28-41 In May 1994, the National Institute for Occupational Safety and Health (NIOSH) considered crystalline silica to be a potential occupational carcinogen as defined by the Occupational Safety and Health Administration's (OSHA) carcinogen policy [29 CFR 1990], and this information was used in establishing the NIOSH Recommended Exposure Limit (REL) at 50 micro g/m3. NIOSH has long realized that occupational overexposure to respirable crystalline silica (RCS) dust can lead to the development of silicosis, an incurable and often fatal lung disease, but it can also result in health problems that include chronic obstructive pulmonary disease, tuberculosis, chronic bronchitis, emphysema and chronic renal disease. Probably the most significant occupational travesty that brought focus to the effects of silicosis was the Hawk's Nest Tunnel Disaster in southern West Virginia where a 4.83-km (3-mile) tunnel was driven through the Gauley Mountain. The material being removed during the mining of this tunnel for the development of a hydroelectric power plant was a sandstone and limestone ore containing very high levels of crystalline silica. Within months of the completion of this work, 476 of the workers died from acute silicosis. This acute silicosis was caused by extremely high respirable dust concentrations while driving this tunnel and was attributed to inconsistent dust-control methods, including poor ventilation and minimal use of water, not allowing the dust to settle after blasting occurred before workers returned back inside the tunnel and no use of respiratory protection. |
Evaluation of engineering controls at bagging operations to reduce exposures to respirable crystalline silica dust
Louk AK , Patts JR , Haas EJ , Cecala AB . Min Metall Explor 2020 37 (4) 1055-1064 The National Institute for Occupational Safety and Health (NIOSH) and the former U.S. Bureau of Mines (USBM) have given a significant effort over the past four decades in researching and developing engineering controls and interventions to reduce mine workers’ dust exposures during the bagging and palletizing of industrial minerals. Workers performing manual bagging and palletizing of 50- to 100-pound bags typically have some of the highest dust exposures of all workers at mining and mineral processing operations. This paper will provide an overview of available dust control technologies for bagging operations and present the findings of a recent case study that was conducted at four different industrial sand operations to identify the current types of bagging and palletizing technologies being used and to evaluate their effectiveness in reducing workers’ exposures to respirable crystalline silica dust. An evaluation will also be performed to determine if further reductions in respirable dust levels can be achieved by incorporating additional modifications or improvements into the existing technology. |
- Page last reviewed:Feb 1, 2024
- Page last updated:May 06, 2024
- Content source:
- Powered by CDC PHGKB Infrastructure